DIY CO2 Component Kit

Name: DIY CO2 Component Kit - AquariumZone.LK
Price: 3990.00 LKR
Availability: OutOfStock
Rating: 5.00 (1 reviews)

Rs. 3,990.00

3 X Rs. 1,330.00 or 8% Cashback with

or 3 X Rs. 1,330.00 with

or up to 4 X Rs. 997.50 with

2 High Quality Bottle Caps
1 Non return Valve
1 End Cap
1 Needle Valve
1 ON/OFF Tap
2 Suction Cups
1 U Connector
High Pressure hose 3m
1 T connector
Citric Acid 200g
Backing Soda 200g

Out of stock

Guaranteed Safe Checkout

DIY CO2 Component Kit

Upgrade your aquarium setup with the DIY CO2 Component Kit – Order now and experience the difference!

INSTRUCTIONS FOR DIY CO2 USING BAKING SODA AND CITRIC ACID

2 x 2L Plastic Bottles, e.g. Coke or Sprite.

Bottle A
200g Citric Acid Powder.
Mix with 600ml Water until dissolved.

Bottle B
200g Baking Soda
Mix with 200ml Water until dissolved.

To start, citric acid or vinegar is poured into bottle A, and a mixture of baking soda and water is poured in bottle B. The caps with tubing attached are then screwed onto the bottles.

The needle valve is opened, and bottle A is squeezed slightly to inject Citric Acid into bottle B. This starts the generation of CO2. The needle valve is then closed to allow pressure to build in the bottles.

Mix bottle B by swirling the mixture around – you should see some bubbling. If not, squeeze some more citric acid from bottle A.

When the pressure gauge reads 1.5 bar in bottle A you can slowly open the needle valve to begin the flow of CO2 to your diffuser.